ITI & CTI Fitter mock test online Part 3

 Fitter Mock Test Questions and Answers 

 Fitter mock test 

 Fitter mock test online: Types of questions and answers in  Fitter mock, welding,  Fitter mock test online quiz 

 

1. Name the property of metal to resist the effect of tensile forces without rupture.

A) Ductility
B) Tenacity
C) Elasticity
D) Malleability

ANSWER= (B) Tenacity

 

2. What is the accuracy of metric outside micrometer?

A) 0.01 mm
B) 0.001 mm
C) 0.02 mm
D) 0.002 mm

ANSWER= (A) 0.01 mm

 

3. Which type of taper is provided in the drill shank?

A) Pin taper
B) Metric Taper
C) Morse taper
D) Jarno taper

ANSWER= (C) Morse taper

 

4. Which is used to remove drills and sockets from the machine spindle?

A) Drift
B) Sleeve
C) Punch
D) Hammer

ANSWER= (A) Drift

 

5. Name the tap wrench used in the restricted place

A) Box type tap wrench
B) ‘T’ handle tap wrench
C) Solid type tap wrench
D) Double ended adjustable tap wrench

ANSWER= (B) ‘T’ handle tap wrench

 

6. What is the accuracy of the protractor head in a combination set?

A) 1°
B) 2°
C) 3°
D) 4°

ANSWER= (A) 1°

 

7. What is the accuracy of a try square?

A) 0.02 mm per 10 mm length
B) 0.004 mm per 10 mm length
C) 0.002 mm per 10 mm length
D) 0.001 mm per 10 mm length

ANSWER= (C) 0.002 mm per 10 mm length

 

8. Which punch is used for witness marks?

A) Dot punch
B) Pin punch
C) Bell punch
D) Centre punch

ANSWER= (A) Dot punch

 

9. Which pitch of blade is used for cutting bronze, brass, and cast iron?

A) 0.80 mm
B) 1.00 mm
C) 1.40 mm
D) 1.80 mm

ANSWER= (D) 1.80 mm

 

10. Which type of hammer is used for riveting purpose?

A) Sledge hammer
B) Ball pein hammer
C) Cross pein hammer
D) Straight pein hammer

ANSWER= (B) Ball pein hammer

 

11. What is the unit of cutting speed in drilling operation?

A) m/ rev
B) mm/ rev
C) m/ min
D) mm/ min

ANSWER= (C)m/ min

 

12. What is the minor diameter of the thread? system?

A) Minor dia = Major dia – (2 x pitch)
B) Minor dia = Major dia + (2 x pitch)
C) Minor dia = Major dia + (2 x depth)
D) Minor dia = Major dia – (2 x depth)

ANSWER= (D) Minor dia = Major dia – (2 x depth) .

 

13. Which marking media is applied to rough forgings and castings?

A) White wash
B) Prussian blue
C) Copper sulphate
D) Cellulose lacquer

ANSWER= (A) White wash

 

14. What is the pitch of the hacksaw blade used to cut conduit and other thin tubes?

A) 0.8mm
B) 1.0mm
C) 1.4mm
D) 1.8mm

ANSWER= (A) 0.8mm

 

15. Which metal cutting saws are used for cutting different profiles?

A) Power saw
B) Circular saw
C) Contour band saw
D) Horizontal band saw

ANSWER= (C) Contour band saw