Fitter Theory Questions and Answers

 Fitter MCQ Part-6

Fitter Theory MCQ

Fitter Theory Questions and Answers: Types of questions and answers in  Fitter MCQ online Test, Fitter quiz Questions, and Answers. 

 

1.  What is the term of the algebraic difference between size, to its corresponding basic size?

A) Deviation
B) Upper deviation
C) Lower deviation
D) Actual deviation

ANSWER= (A) Deviation

 

2. What is the name of the system if the size of the hole is kept constant, the shaft is varied?

A) Bilateralsystem
B) Unilateral system
C) Hole basis system
D) Shaft basis system

ANSWER= (C) Hole basis system

 

3. Which is grade of tolerance?

A) Bilateral tolerance
B) Unilateral tolerance
C) Fundamental tolerance
D) Fundamental deviation

ANSWER= (C) Fundamental tolerance

 

4. What is the smaller of two limits of size?

A) Actual size
B) Maximum limit of size
C) Minimum limit of size
D) Limit of size

ANSWER= (C) Minimum limit of size

 

5. How many number of fundamental deviation in the BIS system?

A) 25
B) 20
C) 15
D) 26

ANSWER= (A) 25

 

6. Which term is used to indicate a maximum permissible overall variation of form or position of a feature?

A) Tolerance
B) Deviation
C) Geometrical tolerance
D) Fundamental tolerance

ANSWER= (C) Geometrical tolerance

 

7. Which type of screw threads are rounded at the crest and root?

A)Square
B) Circle
C) Triangle
D) Parallelogram

ANSWER= (C) Triangle

 

8. Which one of the following belongs to the form group of geometrical tolerance?

A) Angularity
B) Parallelism
C) Cylindricity
D) Concentricity

ANSWER= (A) Angularity

 

9. Which one of the following belongs to the ‘attitude’ group in geometrical tolerance?

A) Position
B) Flatness
C) Parallelism
D) Straightness

ANSWER= (C) Parallelism

 

10. What is the first step of lesson plan?

A) Presentation
B) Application
C) Preparation
D) Evaluation

ANSWER= (C) Preparation

 

11. Which step while teaching, the instructor should include safety equipment?

A) Preparation
B) Presentation
C) Application
D) Test/Assignment

ANSWER= (A) Preparation

 

12. Which is the third step of the skill teaching cycle? system?

A) Practice
B) Imitation
C) Demonstration
D) Application

ANSWER= (B) Imitation .

 

13. What is the term used for the relationship exists between two mating parts?

A) Fit
B) Limit
C) Tolerance
D) Allowance

ANSWER= (A) Fit

 

14. What is the algebraic difference between the actual size and its corresponding basic size?

A) Deviation
B) Tolerance
C) Actual deviation
D) Upper deviation

ANSWER= (C) Actual deviation

 

15. What is the maximum limit of size if the basic size of the hole is 25 mm and the deviation is ± 0.2mm?

A) 25.2 mm
B) 24.8 mm
C) 25.02 mm
D) 24.08 mm

ANSWER= (A) 25.2 mm